GFL Water still 2102

The Double distiller 2102 is produced of a material combination of stainless steel/glass, without storage tank. Operating fully automatic, it produces two litres of distillate per hour.

• Excellent distillate quality, conductivity of mono-distillate approx. 2.2 μs/cm at 25°C; conductivity of bi-distillate approx. 1.6 μs/cm at 25°C
• Evaporator and baffle of the mono stage are easily accessible by lifting the condensers. Material: stainless steel
• Condensers (coolers): 1st stage made of stainless steel, 2nd stage including baffle made of Duran® Borosilicate glass 3.3
• Water supply through built-in solenoid valve with connection for water pressure hose 1/2 inch (inner Ø 12.7 mm)
• Required cooling water pressure: > 3 bar to max. 7 bar. After switching on the main switch the solenoid valve opens the water supply
• Cooling water outlet with hose connection 3/4 inch (inner Ø 19 mm). Water that has not been condensed flows off through the cooling water outlet
• Distillate withdrawal: stop valve made of Borosilicate glass, 3.3 with PTFE plunger for mono, distillate, outlet with dust guard, shield made of Borosilicate glass 3.3, for bi-distillate
• Low water cut-off: float switch and thermostatic over-temperature cut-out
• An electronic impurity detector switches the unit off in case of high degree impurities in the 1st stage evaporator, the red pilot lamp "Clean" will glow
• Degassing of carbon dioxide through vent on the condensers
• Main switch and pilot lamps to monitor both distillation stages are on the front of the unit